Drop-in DMX RGBW lamps for legacy GU10 twist-lock, E27 Edison screw and B22 bayonet sockets. MaxiLINK technology runs DMX 512 control on the same 2-core cable that powers the strand — upgrade existing installations to fully controllable colour without rewiring. multi-chip LED, Intelligent White 2700-6500K or saturated RGBW, dimmable, .
Direct retrofit for legacy GU10 twist-lock fittings — 50 mm / 1.97 in body with classic two-pin GU10 base, 76 mm / 2.99 in overall length. High Output 4.7 W with 190 lm RGBW saturated colour and 300 lm Intelligent White (2700-6500 K). Up to 50 units on one MaxiLINK strand, 100 m / 328 ft max from first to last fitting on a single 2-core cable.
DMX 512 runs on the same 2-core cable that powers the strand. Drop into existing GU10 wiring without rewiring or adding control cores.
Saturated red, green, blue and white from a single multi-chip LED. Smooth colour mixing for facade and retail accent.
Same lamp, same control — full intelligent-white tuning from warm 2700 K to cool 6500 K for venue lighting and feature wash.
Single MaxiLINK driver feeds up to 50 GU10 retrofit lamps in series on a 2-core cable, max 100 m / 328 ft end-to-end.
15°, 25°, 40° spot/narrow, 15°×30° elliptical and 80° no-optic flood. Cover spot accent through wide wash from one platform.
Standard GU10 base — fits existing track, downlight, retail spot and architectural fixtures without housing modification.
Direct retrofit for E27 Edison screw fittings — 50 mm / 1.97 in × 90 mm / 3.54 in lamp body with full IP54 weather protection for protected outdoor and festoon installations. High Output 4.7 W or Standard 2.35 W variants, both with full DMX RGBW or Intelligent White 2700-6500 K control over the patented MaxiLINK 2-core system.
DMX 512 on the same 2-core cable that powers the strand. Drop into festoon, lantern, pendant and outdoor decorative fixtures with E27 sockets.
Saturated colour from a single multi-chip LED. Engineered for facade, hospitality and architectural accent runs.
Two power variants. Standard (2.35 W) for 100-unit strands and 132,000-hour lifetime, High Output (4.7 W) for 190 lm RGBW peak brightness.
Sealed for protected outdoor service — exterior festoons, covered lantern fixtures, pier and waterfront lighting.
15°, 25°, 40° spot, 15°×30° elliptical and 180° no-optic full flood. Suitable for traditional lantern globe replacement.
Standard E27 Edison screw base — fits civic festoon cable, lantern fittings, decorative pendants and pier installations without rewiring.
Direct retrofit for B22 bayonet cap fittings (common in UK heritage and traditional decorative installations) — same 50 × 90 mm / 3.54 in lamp body and IP54 protection as E27, same DMX RGBW MaxiLINK architecture. Standard or High Output, Intelligent White or saturated colour. Drop-in upgrade for legacy bayonet socket installations.
B22 bayonet cap — the legacy UK standard for traditional pendants, lanterns and heritage decorative fixtures. Drop-in without changing the fixture.
DMX 512 over the same 2-core cable. Same MaxiLINK platform as GU10 and E27 retrofit — mix bases on the same controller.
Saturated red/green/blue/white in one lamp. Programmable colour for civic events, heritage facade illumination and event lighting.
Two output variants on the same body. Standard 2.35 W (100 units, 132,000 hr life), High Output 4.7 W (50 units, 190 lm RGBW peak).
Weather-rated for protected outdoor use — heritage lanterns, festival decorative installations, covered exhibition fittings.
15°, 25°, 40° spot, 15°×30° elliptical and 180° no-optic full flood. Versatile beam pattern selection for traditional lantern globes.
Three retrofit lamp bases (GU10 twist-lock, E27 Edison screw, B22 bayonet) on one MaxiLINK platform. The same patented 2-core DMX-over-power cable runs every fixture, mixing bases on the same controller. Drop-in upgrade to DMX RGBW addressable colour or Intelligent White 2700-6500 K, without rewiring existing installations.
E27 retrofit lamps drop into existing decorative festoon strings — upgrade civic holiday installations to DMX RGBW programmable colour without replacing the cable harness or strand.
Explore Festive →GU10 retrofit for legacy track and architectural spot installations on heritage and contemporary frontages. Convert static halogen spots to fully addressable DMX RGBW without changing the fixture or rewiring.
Explore Architectural →Drop-in DMX RGBW retrofit lamps for legacy fittings — full MaxiLINK control on existing 2-core cable. Talk to a MaxiLED specialist about your retrofit project.