Architectural
Facades · IP68 · DMX
Streetscape
Plazas · promenades · hospitality
Coastal
Seafront · marine · IP68 · salt-spray
Festive
Street festoons · holiday · IP68
Globe Series
Festoon globes · IP68 · Data over power
Inground Series
Depth · Marker · Data over power
Pendant Series
Pendant · Lantern · Data over power
Accent Series
Dot · Focal Facade · Edge · Data over power
Flood Lights Series
MaxiPUNCH · Data over power
Retrofit Series
GU10 · E27 · B22 · Data over power
MaxiZOI — ZEON
Linear neon · US market only
Eco Line
Value-engineered range · DMX · DALI
Home/Products/Globe Series
Series 01 · Festoon Globes

One spherical form. Engineered for every environment.

From holiday cross-street festoons to salt-spray seafront installations, MaxiGLOBE is the reference globe across the MaxiLED catalog. IP68-rated, UV-stabilized polycarbonate, low-voltage 24 V and 48 V platforms — from full RGBW control to premium static white.

Globe family — in detail.

MaxiRGBW · LG-RGBW
Outdoor IP68 IK07 RGBW · DMX 48V DC Vibration ANSI
SKU · LG-RGBW

MaxiRGBW Large Globe — DMX RGBW

MaxiRGBW is the most flexible option in the MaxiLED Festoon range — full RGBW color control, programmable scenes, and integration with DMX lighting systems. Operating on 48V with data and power combined over a single two-core cable, it supports continuous runs up to 328 ft (100 m) with up to 100 globes per power supply. Ideal for dynamic architectural lighting, streetscapes and feature installations.

Globe diameter64 × 64 mm
Power input48 VDC
Wattage2.35 W
LED current100 mA
Run length328 ft · 100 m
Globes per sourceup to 100
Lumens (Clear)80 lm
IP ratingIP68
Impact protectionIK07
Vibration testANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
Weight54 g
ControlDMX512 · MaxiLINK (2-core)
CertificationscULus · UKCA · CE
Warranty5 years
Full RGBW addressable color

4-channel control (Red, Green, Blue, White) with smooth color mixing across the visible spectrum. Each globe individually addressable for programmable scenes, chase patterns, and synchronized animations.

MaxiLINK

48 VDC power and DMX512 data carried on the same two-core cable. No separate signal harness, no decoder boxes — single-cable run from controller to last globe.

100 globes · 100 m / 328 ft continuous run

One power source drives up to 100 individually addressable globes across a 328 ft / 100 m run. Larger installations chain multiple universes via MaxiLINK gateways.

IP68 · IK07 · ANSI C136.31

Submersion-rated sealing, IK07 impact resistance, and vibration-tested to ANSI C136.31 for permanent installation across coastal, vehicular and structural environments.

5-year warranty · −40°C to +50°C / −40 to +122 °F

Operating range from arctic to desert. UL, UKCA and CE certified. Dimmable. 5-year manufacturer warranty included.

Clear or Frosted lens · Black or White cable

Clear lens — 80 lm sparkle effect · Frosted lens — 25 lm soft diffuse. Cable & lamp holder available in Black or White anodized; RAL custom colors on request.

MaxiRGBW Large Globe · dimensions mm (inches)
MaxiRGBW Large Globe technical drawing Front view showing dimensions: cap 26mm / 1.02 in × tab 16mm / 0.63 in, globe Ø 64mm / 2.52 in (round), total assembly 82mm / 3.23 in, cable Ø 6mm / 0.24 in 10AWG. CABLE Ø 6mm (0.24") 16 (0.63) 26 (1.02) 64 mm (2.52") 82 mm (3.23") TOTAL 64 mm (2.52")
Globe Ø
Globe height
Total height
Cap Ø
64 mm (2.52")
64 mm (2.52")
82 mm (3.23")
64 mm (2.52")
Globe weight
54 g (1.90 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — up to 100 globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiLUX · LG-LUX
Outdoor IP68 DMX White DMX / MaxiLINK Dimmable
SKU · LG-LUX

MaxiLUX Large Globe

DMX-controllable white large globe — smooth digital dimming from 0–100%. The white-only choice for projects that need programmable intensity without color complexity. Ideal for hospitality, civic and corporate facades.

Globe diameter64 × 64 mm
Power input48 VDC
Wattage2.35 W
LED current100 mA
Run length328 ft · 100 m
Globes per sourceup to 100
Lumens (Clear)130 lm
Light typeDMX White High Output (Intelligent White)
Weight54 g
IP ratingIP68
Impact protectionIK07
Vibration testANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlDMX512 · MaxiLINK (2-core)
CertificationscULus · UKCA · CE
Warranty5 years
Programmable white 0–100% dimming

Smooth digital dimming over the DMX512 protocol — same controllers, same channels, same setup as RGBW but tuned for monochrome whites. Each globe individually addressable for chase effects or zoned intensity.

MaxiLINK

48 VDC and DMX signal combined on a single two-core cable — same cable infrastructure as the RGBW model. No separate signal runs, no in-line decoder boxes.

100 globes · 328 ft / 100 m run

One power source drives up to 100 globes across a 100 m / 328 ft strand. The white spec-grade footprint for long facade outlines and event canopies.

Clear lens · 130 lm peak

Clear lens — 130 lm sparkle accent.

IP68 · IK07 · ANSI C136.31 · 5-year warranty

Same outdoor-grade build as MaxiRGBW: submersion-rated, impact-tested, vibration-qualified. UL / UKCA / CE certified, dimmable, 5-year manufacturer warranty.

MaxiLUX · dimensions mm (inches)
CABLE Ø 6mm (0.24") 16 (0.63) 26 (1.02) 64 mm (2.52") 82 mm (3.23") TOTAL 64 mm (2.52")
Globe Ø
Globe height
Total height
Cap Ø
64 mm (2.52")
64 mm (2.52")
82 mm (3.23")
64 mm (2.52")
Globe weight
54 g (1.90 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — up to 100 globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiELITE · LG-ELITE
Outdoor IP68 CRI ≥90 Premium 24 VDC
SKU · LG-ELITE

MaxiELITE CRI90 Large Globe

Premium-grade static white large globe — CRI ≥90 for color consistency across the install. The reference choice for hospitality canopies, heritage facade restoration and any project where light quality matters as much as quantity.

Globe diameter64 × 64 mm
Power input24 VDC
Wattage1.4 W
LED current100 mA
Run length328 ft · 100 m
Globes per source150+ globes
CRI90 CRI
Color temp3000K (warm white only)
Lumens (Clear)58 lm
Weight54 g
IP ratingIP68
Impact protectionIK07
VibrationANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlON/OFF
CertificationscULus · UKCA · CE
Warranty5 years
CRI ≥90 premium phosphor LED

High color rendering index with factory-binned color consistency — globes look the same across the strand. The choice for hospitality and heritage where light quality is critical.

Static 3000K — premium warm white

CRI ≥90, factory-binned for color consistency across batches and reorders. 3000K is the reference white for the ELITE platform.

150 globes per power supply · 328 ft

Run-length optimized for warm-white efficiency — one 24 V power supply feeds up to 150 globes across a 328 ft (100 m) strand. Excellent for long colonnades, market roofs, courtyard perimeters.

Clear lens · 58 lm

Clear lens with 58 lm output. 24 VDC operation, ON/OFF control.

IP68 · IK07 · 5-year warranty

Marine-grade sealing, impact-tested housing. UL / UKCA / CE certified. 5-year manufacturer warranty. The spec-grade premium static white.

MaxiELITE · dimensions mm (inches)
CABLE Ø 6mm (0.24") 16 (0.63) 26 (1.02) 64 mm (2.52") 82 mm (3.23") TOTAL 64 mm (2.52")
Globe Ø
Globe height
Total height
Cap Ø
64 mm (2.52")
64 mm (2.52")
82 mm (3.23")
64 mm (2.52")
Globe weight
54 g (1.90 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — up to 150 globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiCC · LG-CC
Outdoor IP68 RGB Random Auto cycle 24 VDC
SKU · LG-CC

MaxiCC RGB Random Large Globe

Color-changing large globe with built-in random RGB cycling — no DMX controller required. Plug-and-play festive solution: each globe shifts color independently with smooth fade transitions, creating a non-synchronized, organic chromatic display.

Globe diameter64 × 64 mm
Power input24 VDC
Wattage1.1 W
LED current50 mA
Run length328 ft · 100 m
Globes per source200+ globes
Color modeRandom Color Change
LEDsRed · Green · Blue
Weight41 g
IP ratingIP68
Impact protectionIK07
VibrationANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlON/OFF — no controller required
CertificationscULus · UKCA · CE
Warranty5 years
Built-in RGB random color cycle

Each globe contains its own micro-controller and runs an independent color cycle — no external DMX, no decoder, no scene programming. Just power-on and the strand starts shifting through smooth RGB transitions.

Smooth color transitions

Slow organic fade between random RGB states. Because each globe is independent, the strand never synchronizes — every moment is a unique chromatic pattern.

200 globes per power supply · 328 ft

Highest globe density in the family — one 24 V power supply feeds up to 200 globes on a 328 ft (100 m) run. Ideal for festive municipal lighting, market squares, holiday installations.

Plug-and-play, no programming

No DMX controller, no software, no scene file. The strand is colorful out of the box. The contractor-friendly option for festival operators and event production.

IP68 · IK07 · 5-year warranty

Same outdoor-grade build as the rest of the Large Globe family — submersion-rated, impact-tested, UL / UKCA / CE certified, 5-year manufacturer warranty.

MaxiCC · dimensions mm (inches)
CABLE Ø 6mm (0.24") 16 (0.63) 26 (1.02) 64 mm (2.52") 82 mm (3.23") TOTAL 64 mm (2.52")
Globe Ø
Globe height
Total height
Cap Ø
64 mm (2.52")
64 mm (2.52")
82 mm (3.23")
64 mm (2.52")
Globe weight
41 g (1.45 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — up to 200 globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiULTRA · LG-ULTRA
Outdoor IP68 High output Static 24 VDC
SKU · LG-ULTRA

MaxiULTRA Static Large Globe

The efficiency benchmark of the Large Globe family. One 24 V power supply drives 300+ static globes across a 328 ft (100 m) run at the lowest watt-per-globe in the catalog — the value choice for large-scale permanent installations where consistency and simplicity come first. Two whites (2700 K, 10,000 K) plus five static colors.

Globe diameter64 × 64 mm
Power input24 VDC
Wattage0.6 W
LED current50 mA
Run length328 ft · 100 m
Globes per source300+ globes
Lumens (Clear)30 lm
Color temp (white)2700K · 10000K
Static colorsRed · Green · Blue · Pink · Amber
Weight54 g
IP ratingIP68
Impact protectionIK07
VibrationANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlON/OFF
CertificationscULus · UKCA · CE
Warranty5 years
300+ globes per power supply

Highest globe density in the catalog — one 24 V power supply drives 300+ static globes per 328 ft (100 m) run. The most efficient option per foot and per watt — engineered for large-scale installations.

Color options — 2700K, 10000K + R, G, B, Pink, Amber

Two white CCTs (2700K warm and 10000K daylight) plus fixed monochromatic Red, Green, Blue, Pink and Amber. Specify color at order — globes are non-changing in field. Color mixing achievable by intermixing different SKUs on the same strand.

Clear lens · 30 lm

Clear lens with 30 lm output. 0.6W per globe — the most efficient watt-per-globe in the family while maintaining the same 100 m / 328 ft run capability.

IP68 · IK07 · −40°C to +50°C / −40 to +122 °F

Marine submersion sealing, impact-tested housing, full thermal range from arctic to desert. UL / UKCA / CE certified. ANSI C136.31 vibration tested.

5-year manufacturer warranty

Same warranty as the rest of the Large Globe range. Spec-grade build quality for permanent outdoor installations and 24/7 operation environments.

MaxiULTRA · dimensions mm (inches)
CABLE Ø 6mm (0.24") 16 (0.63) 26 (1.02) 64 mm (2.52") 82 mm (3.23") TOTAL 64 mm (2.52")
Globe Ø
Globe height
Total height
Cap Ø
64 mm (2.52")
64 mm (2.52")
82 mm (3.23")
64 mm (2.52")
Globe weight
54 g (1.90 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — 300+ globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiCC Small · SG-CC
Outdoor IP68 RGB Random Compact 32 mm / 1.26 in 24V DC · 200+
SKU · SG-CC

MaxiCC RGB Random Small Globe

Compact festoon-scale color-changing globe with built-in random RGB cycling. Same chromatic logic as the large variant, in a compact 32 mm (1.26 in) globe — denser strands, tighter spacing, perfect for restaurant patios, retail shopfronts and seasonal market lighting.

Globe diameter32 × 32 mm
Power input24 VDC
Wattage1.1 W
LED current50 mA
Run length328 ft · 100 m
Globes per source200+ globes
Color modeRandom Color Change
LEDsRed · Green · Blue
Weight24 g
IP ratingIP68
Impact protectionIK07
VibrationANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlON/OFF — no controller required
CertificationscULus · UKCA · CE
Warranty5 years
Compact 32 mm / 1.26 in globe

Half the diameter of the Large Globe family — denser visual rhythm at the same spacing, fitter under low canopies and tighter geometries. Same 24 V low-voltage infrastructure.

Built-in RGB random cycle

Each globe shifts independently through smooth RGB transitions — no DMX, no controller, no scene programming. Plug-and-play festive.

200 globes per power supply · 328 ft

Same 328 ft (100 m) run capability and 200 globes per power supply as the Large variant, just at half the diameter. Excellent for restaurant patios and high-density retail installations.

Plug-and-play, no programming

No DMX controller required. Power-on and the strand starts cycling. The contractor-friendly festive option in a compact size.

IP68 · 5-year warranty

Fully outdoor-rated — easy to route under awnings and pergolas. 5-year manufacturer warranty.

MaxiCC Small · dimensions mm (inches)
CABLE Ø 5mm (0.20") 20 (0.79) 30 mm (1.18") 48 mm (1.89") TOTAL 32 mm (1.26")
Globe Ø
Globe height
Total height
Cap Ø
32 mm (1.26")
30 mm (1.18")
48 mm (1.89")
20 mm (0.79")
Globe weight
24 g (0.85 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — up to 200 globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
MaxiULTRA Small · SG-ULTRA
Outdoor IP68 ANSI C136.31 Compact 32 mm / 1.26 in 24V DC · 300+
SKU · SG-ULTRA

MaxiULTRA Static Small Globe

A finer, more discreet festoon profile — the same 300+ globes-per-power-supply efficiency in a compact 32 mm / 1.26 in globe. The strand option for tight architectural detailing, dense retail awnings, and any project where the large globe is visually too prominent.

Globe diameter32 × 32 mm
Power input24 VDC
Wattage0.6 W
LED current50 mA
Run length328 ft · 100 m
Globes per source300+ globes
Lumens (Clear)23 lm
Color temp (white)2700K · 10000K
Static colorsRed · Green · Blue · Pink · Amber
Weight24 g
IP ratingIP68
Impact protectionIK07
VibrationANSI C136.31
Operating temp.−40 to +122 °F (−40 to +50 °C)
ControlON/OFF
CertificationscULus · UKCA · CE
Warranty5 years
Compact 32 mm / 1.26 in globe

Half the diameter of the Large Globe family — denser visual rhythm at the same spacing. The festoon option when the Large globe is visually too prominent for the architecture.

300+ globes per power supply

Highest globe density in the Small family — one power supply feeds 300+ globes per 328 ft (100 m) strand. The most efficient watt-per-globe in the compact lineup.

Color options — 2700K, 10000K + R, G, B, Pink, Amber

Two white CCTs (2700K warm and 10000K daylight) plus fixed monochromatic Red, Green, Blue, Pink and Amber. Color mixing achievable by intermixing different SKUs on the same strand.

Clear lens · 23 lm

Clear lens with 23 lm output. 0.6 W per globe — the efficiency choice for dense festoon strands.

IP68 · 5-year warranty

Outdoor weather-rated build. UL / UKCA / CE certified. 5-year manufacturer warranty. The compact spec-grade companion to the Large ULTRA.

MaxiULTRA Small · dimensions mm (inches)
CABLE Ø 5mm (0.20") 20 (0.79) 30 mm (1.18") 48 mm (1.89") TOTAL 32 mm (1.26")
Globe Ø
Globe height
Total height
Cap Ø
32 mm (1.26")
30 mm (1.18")
48 mm (1.89")
20 mm (0.79")
Globe weight
24 g (0.85 oz)

UV-stabilized polycarbonate globe with anodized aluminum cable holder. Standard: Black anodized + Black cable · Option: Silver + White cable · RAL custom colors on request (minimum order).

Run-length planning — 300+ globes per power supply · max run 328 ft (100 m).

Catenary Cable · Grommet + Zip-Tie Fixing 4 STEPS · NTS
20 mm 20 mm 0.79 in
Figure 1
Place rubber grommets
Figure 2
Secure with a UV zip tie
PSU
Figure 3
Repeat & connect
Figure 4
Alternative · hoop effect
  1. 01
    Place rubber grommets. With the catenary cable taut and secure above the MaxiLED strand cable, place a rubber grommet 20 mm (0.79 in) either side of the globe housing. The two grommets act as stops that hold the globe in position so it cannot slide along the cable.
  2. 02
    Secure with a UV zip tie. Using a UV-resistant zip tie (4.8 mm width), clamp each grommet up against the catenary cable and trim the excess. This locks the globe in place so it cannot move; the grommet stays placed over the MaxiLED cable.
  3. 03
    Repeat & connect. Repeat Steps 1–2 to fix every globe along the strand until the installation is complete, then connect the strand to the correct transformer.
  4. 04
    Alternative · hoop effect. For a deeper, more arched catenary, do not fix the grommets to the support cable — the strand is left free to drape into a decorative hoop between the two anchor points. Keep voltage drop below 5% across the strand.
Compare the range

Five globes. Two low-voltage platforms.

MaxiLED Large Globe series
SpecificationMaxiRGBWMaxiLUXMaxiELITEMaxiCCMaxiULTRA
Build & protection
IP ratingIP68IP68IP68IP68IP68
Impact protectionIK07IK07IK07IK07IK07
Warranty5 years5 years5 years5 years5 years
Performance
Voltage48 VDC48 VDC24 VDC24 VDC24 VDC
Lumens80 lm130 lm58 lm30 lm
Wattage2.35 W2.35 W1.4 W1.1 W0.6 W
CRI ≥90
Run distance per power supply328 ft (100 m)328 ft (100 m)328 ft (100 m)328 ft (100 m)328 ft (100 m)
Globes per power supply100100150+200+300+
Color & control
RGBW colorRGB Random
Intelligent White option
Static
Durability, options & listings
Vibration tested (ANSI C136.31)
Operating temp −40°C to +50°C / −40 to +122 °F (−40°F to +122°F)
Small Globe option
Frosted globe option
Light shield available
cULus Listed
Power input: 110–240 VAC (50/60 Hz) on all models · converted to low-voltage DC at the driver
MaxiLED Small Globe series
SpecificationMaxiELITEMaxiCCMaxiULTRA
Build & protection
IP ratingIP68IP68IP68
Impact protectionIK07IK07IK07
Warranty5 years5 years5 years
Performance
Voltage24 VDC24 VDC24 VDC
Lumens58 lm30 lm
Wattage1.4 W1.1 W0.6 W
CRI ≥90
Run distance per power supply328 ft (100 m)328 ft (100 m)328 ft (100 m)
Globes per power supply150+200+300+
Color & control
RGBW colorRGB Random
Static
Durability, options & listings
Vibration tested (ANSI C136.31)
Operating temp −40°C to +50°C / −40 to +122 °F (−40°F to +122°F)
Frosted globe option
Light shield available
cULus Listed
Power input: 110–240 VAC (50/60 Hz) on all models · converted to low-voltage DC at the driver
Where it's used

Applications across
three verticals.

Festive · IP68

Cross-street festoons & civic decoration

RGBW globes for holiday programs, light festivals and city-center civic events. DMX-programmable for multi-event use across the year.

Explore Festive →
Streetscape · IP68 · Hospitality

Hospitality outdoor & urban placemaking

Warm-white festoon globes for restaurant terraces, plaza perimeters and urban hospitality programs.

Explore Streetscape →
Coastal · IP68 · Marine

Seafront festoons & coastal hospitality

Submersion-rated globe variant with marine-grade conductors for coastal installations.

Explore Coastal →

Specifying a festoon program?

Photometric files, sample globes and project-specific pricing available from your local MaxiLED specialist. Quote turnaround typically 48–72 hours.